StoreCommercial building energy benchmarking compares a property’s energy use with its own history, other buildings, or a reference level. It helps owners and facility teams decide where to investigate first. Benchmarking does not identify a failed motor, incorrect schedule, or control fault by itself; it is a starting point for a more detailed review.
The U.S. Environmental Protection Agency (EPA) describes benchmarking as measuring and comparing building energy use. Its ENERGY STAR Portfolio Manager can compare a property with its historical performance, similar buildings, or national references. For eligible property types, the tool can also produce a 1–100 score normalized for weather and operating characteristics. A score is a comparison metric, not a diagnosis of building equipment.
What data should be gathered first?
Start with a full year of utility bills when available, covering each fuel used to operate the building. Record meter identifiers, account boundaries, service dates, units, and whether the data covers the whole property or only part of it. For a campus or mixed-use property, document which meters serve which buildings and tenants.
Confirm the property details used for comparison: building type, gross floor area, operating hours, occupancy, major uses, and any data required by the benchmarking tool. Review renovations, vacant space, new loads, tenant changes, and weather conditions that might affect the comparison. Incorrect floor area or missing meters can distort the result, so retain the source for each entered value.
How should teams interpret energy use intensity?
Energy use intensity (EUI) expresses energy consumed in relation to a building characteristic, commonly annual energy per square foot. It allows a team to compare buildings of different sizes, but the number only means something when the property use, meter coverage, and reporting period are understood. Site EUI and source EUI describe different energy boundaries; choose the metric that fits the question and explain it consistently.
Portfolio-wide comparisons can help identify buildings that deserve attention. A higher value than peers is a signal to investigate, not proof of waste or poor maintenance. Differences in operating hours, weather, equipment, tenant activity, process loads, and meter coverage may explain some of the gap.
What is a practical benchmarking workflow?
- Define the property boundary. Decide whether the analysis covers one building, a campus, or separately metered tenant areas.
- Collect and validate data. Check dates, units, meter coverage, property details, and missing periods before comparing.
- Select a baseline. Use a period that represents normal operation, and document changes that make later periods different.
- Compare like with like. Use appropriate property types, weather context, operating conditions, and consistent metrics.
- Prioritize an investigation. Review the utility trend alongside equipment, control schedules, occupancy, and system-level measurements.
- Track the action and result. Record what changed, when it changed, and which metric will show whether performance moved.
ENERGY STAR notes that benchmarking can support capital prioritization and help teams track performance over time. Many state and local jurisdictions also have reporting programs, but their covered-building definitions, deadlines, and submission rules vary. Check the rules for the property’s actual location and size rather than relying on a general national summary.
How does benchmarking connect to building operations?
When a benchmark highlights an outlier, break the question down. Review utility intervals or submeter data if available. Compare plant run hours, equipment staging, temperature and pressure trends, schedules, and maintenance history. Check whether a building automation system reflects the current occupancy and sequences. Ask operators what changed during the comparison period.
After an approved maintenance or retrofit project, continue tracking the same metric and record changes in weather, occupancy, and building use. A measured reduction should be attributed only after accounting for those factors and the quality of the baseline. A benchmark can show whether the trend moved; detailed measurement and verification may be needed to quantify a specific project’s effect.
The Tustin Group’s Energy Solutions page describes web-based energy management services. For a building-specific discussion, use the contact page and bring utility data, property details, and the operational question you want to answer.
Frequently asked questions
Is energy benchmarking the same as an energy audit?
No. Benchmarking compares energy-use data against a baseline or reference. An audit investigates building systems and identifies potential measures in greater detail.
Does a low ENERGY STAR score prove that HVAC equipment is failing?
No. A score provides a comparison for eligible property types and accounts for selected operating characteristics. It does not identify a specific fault or establish the cause of performance.
How often should a commercial building be benchmarked?
Track data regularly enough to support management and any applicable reporting requirements. The right interval depends on the owner’s goals, available data, and local rules.
Sources
- U.S. EPA ENERGY STAR, Benchmark Your Building With Portfolio Manager
- U.S. EPA ENERGY STAR, What Is Energy Use Intensity (EUI)?
- U.S. EPA ENERGY STAR, The Basics of Building Benchmarking to Meet State and Local Policy Requirements
- The Tustin Group, Energy Solutions